Voltage and continuity tester 0.5 - 1,000 V AC, CAT IV 45217 incl. 2x AAA batteries Tracks the voltage. Safety rule: determine zero voltage! The voltage and continuity tester from Wiha is your ideal daily companion to easily check this prerequisite of the safety rule and to support you with the various requirements in your daily work. It allows voltage testing of an extensive range from 0.5 V to 1,000 V AC or 1,500 V DC. In addition, the voltage tester can be used for continuity testing, optical rotational field testing, single-pole testing, and automatic polarity detection. Plus, resistance measurements and frequency measurements can also be conducted. Thanks to a large digital LCD display with background illumination and an LED display, the measurement results are immediately readable. An additional signal sound indicates the current flow during the continuity check. The check can also be conveniently carried out on sockets with a single hand thanks to the integrated spacer. In addition, the voltage tester from Wiha has an integrated flashlight function, providing optimal illumination conditions even in poorly lit work environments. Simultaneous pressing of both buttons on both handles of the test tips allows the functional test of the FI protective switch by connecting a load. According to the measurement categories CAT III up to 1000 V and CAT IV up to 600 V, the voltage and continuity tester from Wiha offers maximum safety for working on building installation and directly on the sources of low-voltage installations. Dimensions 240 x 75 x 30 mm Measuring category CAT III up to 1,000 V and CAT IV up to 600 V. Standard IEC 61243-3:2014 IP 64. CE certified. Application To determine zero voltage. For standardized voltage testing, continuity testing, rotational field testing and resistance testing incl. FI protective switch measurement. Specifications: Order-No. 45217 EAN 4010995452179 Battery 2x AAA batteries Voltage V AC min – max 0,5 - 1000 Voltage V DC min – max 0,5 - 1500 Contamination level 2 Remote voltage test Yes ATEX approval No Photovoltaic-compatible Yes eMobility-compatible No Integrated flashlight Yes FI check Yes Display LED and LCD displays Protection class IP 64 Rotation field indication LED L, R Continuity check LED and acoustic tone Operating temperature -15°C - 50°C Storage temperature -20°C - 60°C Height above sea level 2000m Single-pole phase test 100 - 1,000 VAC (40 to 70 Hz) Rotation field test 170 - 7,000 V phase to phase AC 40-70 Hz Permeability test Measuring range 0 - 500 kΩ + 50% LED ELV display > 50 V AC, > 120 V DC LCD range 0,5 V to 1000 V AC, 0,5 V to 1500 V DC LCD resolution 0,1 V (< 10 V) and 1 V (> 10 V) LCD precision +/- 3%, +/- 3 digits (< 10 V) and +/- 3%, +/- 5 digits (> 10 V) LCD overflow display OL Inherent time < 0,5s LED and < 1s LCD Safety circuit < 3,5 mA (at 1,000 V) Measuring mode 30 s ON (operation time), 240 s OFF (recovery time) Battery consumption about 80 mA Humidity max 85 % RH Acoustic signal Yes Overall length (mm) 282