QNAP 16-BAY ENTPR ZFS NAS SAS 12G/6G XEON D-2123IT 1.9GHZ 64GB RAM EXT

ES1686dc R2 Series

• Dual active-active controllers
  • Dual active-active controllers provide supreme uptime and redundancy to ensure high availability.
• NVRAM module
  • NVRAM reduces the risk of losing write cache data if unexpected power failure occurs.
• QES operating system
  • Supports ZFS near-limitless snapshots, SnapSync, block-level data deduplication, and inline data compression.
• Storage for virtualization
  • Supports VMware® vSphere®, Windows Server® and Citrix® XenServer® for storage virtualization.
• 10GbE SFP+ ports
  • Four 10GbE SFP+ ports (per controller) accelerate virtualization, large file sharing, and intensive data transfer.
• PCIe Gen 3 slots
  • Two PCIe slots (per controller) allow for adding 10GbE/25GbE networking cards to increase application performance.

• Intel® Xeon® D-2123IT 4-core 2.20 GHz processor (burst up to 3.0 GHz) per controller
• Intel® Xeon® D-2142IT 8-core 1.90 GHz processor (burst up to 3.0 GHz) per controller

• 64-bit x86

• Yes

• Yes (AES-NI)

• 32 GB RDIMM DDR4 ECC (4x 8 GB) per controller
• 48 GB RDIMM DDR4 ECC (4 x 4 GB+4 x 8GB) per controller
• 64 GB RDIMM DDR4 ECC (4 x 16 GB) per controller

• 512 GB (8 x 64GB)

• 8 x R-DIMM/LR-DIMM DDR4

• 4GB (Dual boot OS protection)

• 16 x 3.5-inch

• 3.5-inch bays:
  • 3.5-inch SAS hard disk drives
  • 2.5-inch SAS hard disk drives
  • 2.5-inch SAS solid state drives

• Yes

• Yes

• 1 per each controller (64GB M.2 SSD)

• 3 for each controller (assign one for remote management)

• 4 x 10GbE SFP+ for each controller

• Yes

• Yes

• 2 per controller
  • Slot 1: PCIe Gen 3 x8 (CPU)
  • Slot 2: PCIe Gen 3 x8 (CPU)

• 2 per each controller

• 3U Rackmount

• System Power LED (Green): on/off
• System Status (Green/ Orange): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged
• LCD Status Display (Two-digit number): Status of JBOD connection

• Power, Reset

• 132 × 446.2 × 587.75 mm

• 30.22 kg

• 34.92 kg

• 0 - 40 °C (32°F - 104°F)

• -20 - 70°C (-4°F - 158°F)

• 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F)

• Redundant/ Hot Swap Power Vin:90~264VAC;700W

• 500.87 W

• Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3)

• Buzzer

• 5

• 10000

• FCC Class A (USA only)
• CE Mark ( EN55022 Class A, EN55024)
• EN60950
• BSMI
• VCCI
• CB
• LVD