ioMirror E3210 Ethernet Peer-to-Peer I/O with 8 digital inputs and 8 digital outputs Direct input-to-output signal communication over IP High speed Peer-to-Peer I/O within 20 ms One physical alarm port for connectivity status Quick and easy utility and web-based settings Local alarm channel Remote alarm message Supports Modbus/TCP for remote monitoring Optional LCD module for simple setting ioMirror E3000 Ethernet I/O products are designed as a cablereplacement solution that connects remote digital input signals to output signals over an IP network. The ioMirror E3210 provides 8 digital input channels, 8 digital output channels, and a 10/100M Ethernet interface. Up to 8 pairs of digital input and output signals can be exchanged over Ethernet with another ioMirror E3210, or can be sent to a local PLC or DCS controller. Over a local area network, the ioMirror can achieve a low signal latency (typically less than 20 ms). With ioMirror, remote sensors can now be connected to local controllers or display panels over copper, fiber, or wireless Ethernet infrastructures. Signals can be transmitted over virtually unlimited distances, without noise problems. • Inputs and Outputs Digital Inputs 8 channels Digital Outputs 8 channels Alarm Port Output 1 channel • Digital Input Sensor Type Wet Contact (NPN), Dry Contact I/O Mode Digital Input Dry Contact • On: short to GND • Off: open Wet Contact (source type) • On: 0 to 3 VDC • Off: 10 to 30 VDC Common Type 8 points per COM Isolation 3K VDC or 2K Vrms Digital Filtering Time Interval Software selectable Over-voltage Protection 36 VDC • Digital Output Type Sink I/O Mode Digital Output Over-voltage Protection 45 VDC Over-current Protection 2.6 A (4 channels @ 650 mA) Over-temperature Shutdown 160°C Current Rating 200 mA per channel Isolation 3K VDC or 2K Vrms • Alarm Port Output Current Rating 200 mA per channel Isolation 3K VDC or 2K Vrms • LAN Ethernet 1 x 10/100 Mbps, RJ45 Protection 1.5 KV magnetic isolation Protocols Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, HTTP, SNTP • Power Requirements Power Input 24 VDC nominal, 12 to 48 VDC DO Power 24 VDC nominal, up to 45 VDC Power Consumption 136 mA @ 24 VDC • Physical Characteristics Wiring I/O cable max. 14 AWG Dimensions 115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in) Weight 205 g • Environmental Limits Operating Temperature -10 to 60°C (14 to 140°F) Storage Temperature -40 to 85°C (-40 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing) • Standards and Certifications Safety UL 508 EMI FCC Part 15 Subpart B Class A, EN 55022 Class A EMS IEC 61000-4, IEC 61000-6 Shock IEC 60068-2-27 Freefall IEC 60068-2-32 Vibration IEC 60068-2-6 • Warranty Warranty Period 5 years