RM-CR Remote Conference Processor Features: Standard network audio support for "Dante"; all compatible devices can be connected with single network cable Automatically recognizes connected devices on the same network for audio routing Equipped with the Auto Tuning functions that automatically measure and provide the optimum sound settings for the environment Equipped with the Auto Mixer functions that automatically mix the audio of all connected microphones Equipped with various Input/Output connections such as USB, VoIP,, analog, and Bluetooth Specifications: Dimensions W215 mm × D260 mm × H44 mm Weight 1.6 kg Power Requirements PoE+ (IEEE 802.3at, LLDP), DC 48 V Power consumption (max) 15.0 W Connector RJ 45, USB, XLR balanced, RCA In Operation Temperature 0～40 ℃ Humidity 30 %～90 % (No condensation) Storage Temperature -20～60 ℃ Humidity 20 %～90 % (No condensation) Indicator Power Indicator, Status Indicator, Bluetooth Indicator, Network Port Indicator (x3) Mount Table Mount, Rack Mount Maximum Device Number with RM-CR - Accessories Installation Manual, USB Cable (A-B) 5 m (16.4 ft), USB Cable (A-microB) 1 m (3.3 ft), 4x Rubber foot, Access Panel Options RM-MTL: Table Mount Kit, RM-MRK: Rack Mount Kit Network Specifications Ether1 Dante Audio/Dante Control, Remote Control, WebUI, PoE+ Ether2/Ether3 Corporate Network, Remote Control, SIP, WebUI USB USB2.0, Network Class, WebUI, Fixed IP Audio Specifications Audio I/O Dante 16in/16out USB USB2.0, Audio Class 1.0, Input: 2 ch, Output: 2 ch @48 kHz Mic Input XLR balanced, Input 2 ch AUX RCA unbalanced (Line Level), Input: 2 ch, Output: 2 ch Speaker Out RCA unbalanced (Line Level), Output: 2 ch Bluetooth Version Bluetooth 4.2 Supported Profiles HFP (1.6), A2DP, AVRCP Supported Codec CVSD, SBC, mSBC Wireless Output Class2 Maximum Communication Distance 10 m (32.8 ft) (no obstacles) Radio Frequency (Operational Frequency) 2,402 to 2,480 MHz Maximum Output Power (EIRP) 4.0 dBm (2.5 mW) SIP Call Handling Dial, Answer, Hold, Resume, Forwarding, Do not disturb, Call ID, Voice Mail Notifications (switch configured) Call Bridging Supports Bridging SIP, USB, BT and AUX Calls. Join, Split, Hold, Resume, 5+1 Lines: Up to 2 SIP calls, 1 USB call, 1 Bluetooth Call, 1 AUX, plus the user Codecs G.711, G.722HD, G.729ab, G.726 DTMF Support RTP event, SIP in-band, SIP info package Security SRTP Support (RFC 1889), IETF SIP support(RFC 3261 and companion RFCs) Sampling Rate 48 kHz Bit Depth 24 bit Latency 8 [ms] (Dante In to USB Out, includes signal processing) Frequency Response 20 Hz – 20 kHz