SHARK Disc PWM RGB Fan 4044951034314 Features: Unremitting Performance. With its 1,400 revolutions per minute and its maximum airflow of up to 82.35 cubic meters per hour, the SHARK Disc PWM enables optimal cooling performance at all times for a carefree gaming experience. With an average working life at least 50,000 hours, the user will be able to enjoy this fan for a long time. The rubberized contact points reduce the vibration onto the PC case and ensure that the fan runs as smoothly as possible. Cool Tranquility. High performance does not always mean that there is a lot of noise. The SHARK Disc PWM proves this without a doubt. At just 24.8 dB(A) at full rotational speed, the fan is hardly noticeable to the ears during operation. Its fluid dynamic bearing also ensures that even during the highest speed of rotation, the maximum noise level will cause no distraction at all. Colorful Cooling. The illumination of the nine addressable RGB LEDs can be customized as desired, and the PC case can radiate in the most vivid of colors within the RGB spectrum. The fan can glow in up to 16.8 million different colors, and these can be varied as desired using the software on the mainboard. Problem-Free to Connect. To ensure the greatest possible compatibility, the fan can be attached to the mainboard using the fan’s 4-pin PWM connector. Via a 5V-D-G or a 4-pin 5V-D-coded-G mainboard header, the RGB LEDs can be connected to a compatible addressable RGB controller. Easy Integration. The SHARK Disc PWM can be synchronized with almost any commonly available addressable RGB controller - the choice of which lies with the user: For example, Aura Sync from Asus, Mystic Light Sync from MSI, Fusion from Gigabyte, or other addressable RGB controllers can be used that have either a 3-pin 5V-D-G or a 4-pin 5V-D-coded-G connector. Specifications: General Fan Speed: 400 ~ 1,400 rpm ± 10 % Bearing Type: Fluid Dynamic Bearing Max. Airflow: 82.35 m³/h Max. Air Pressure: 1.82 mm-H2O Noise Level: 24.8 dB(A) MTBF: Min. 50,000 Hours Illumination: 9x Addressable RGB LEDs Weight incl. Fixed Cable: 97 g Dimensions (L x W x H): 120 x 120 x 25 mm Cable and Connectors Fan Connector: 4-Pin PWM LED Connector: 3-Pin (5V-D-G) & 4-Pin (5V-D-coded-G) Cable Length: 450 mm LED Cable Length: 500 + 50 mm Electrical Specifications Rated Voltage Fan: 12 V Rated Voltage LEDs: 5 V Rated Current Fan: 0.15 A Rated Current LEDs: 0.4 A Rated Power Fan: 1.8 W Rated Power LEDs: 2.0 W Start Voltage: 7 V Package Contents SHARK Disc PWM Set with Fan Screws Manual EAN Code 4044951034314