LightPulse LPe12002 8Gb/s Fibre Channel PCI Express Dual Channel Host Bus Adapter Part Number LPe12002-M8 - 8Gb/s dual-port adapter LPe12002-X8 - 8Gb/s dual-port adapter with long wave optical transceivers Standards ANSI Fibre Channel: FC-PI-4, FC-FS-2, FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA, FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4, SBC-3, FC-SP, FC-HBA and SMI-S v1.1 PCI Express base spec 2.0 PCI Express card electromechanical spec 2.0 Fibre Channel class 2 and 3 PHP hot plug-hot swap Architecture Dual-channel 8Gb/s, 4Gb/s or 2Gb/s FC Link speeds automatically detected Integrated data buffer and code space memory Comprehensive OS Support Windows, Linux, NetWare, Solaris, VMware Additional support is available from OEMs and partners Hardware Environments PowerPC,® SPARC,® x86, x64 and Intel® Itanium® 64-bit processor family Optical Data rates: 2.125, 4.25 and 8.5Gb/s (auto-detected) Optics: Short wave lasers with LC type connector Long wave model - LPe12002-X8:Long wave optics allows board to transmit signal up to 1.4Km using 800-SM-LC-I or up to 10km when using 800-SM-LC-L. Cable: Operating at 8Gb/s 50/125 microns (500MHz*km BW)-up to 50m 50/125 microns (2000MHz*km BW)-up to 150m Physical Dimensions Short, low profile MD2 form factor card 167.64mm x 68.91mm (6.60" x 2.71") Standard bracket (low profile available) Power & Environmental Requirements Volts: +3.3, +12 Operating temperature: 0° to 55°C (32° to 131°F) Storage temperature: -40° to 70°C (-40° to 158°F) Relative humidity: 5% to 95% non-condensing 23 degree C wet bulb