P12 Pro Reverse A-RGB - 3 Pack 120 mm A-RGB PWM Fan with Cable Splitter ACFAN00333A Features: Reversed Airflow The P12 Pro Reverse is specifically designed for air intake from the back side. It's particularly suitable when conventional fans would compromise the aesthetics. Optimized Airflow Design The trumpet-shaped intake and teardrop-shaped spokes direct the airflow with reduced flow losses. This reduces air resistance, minimising turbulence and aerodynamic noise. SOTA Microcontroller Reduces motor noise, compensates for load fluctuations, and protects against inrush currents and reverse polarity. More Power – Less Noise An automated measuring and balancing process ensures smooth performance by applying the balancing compound with pinpoint accuracy. Minimum Gap Dimensions for Maximum Efficiency Enables higher static pressure and maximum airflow efficiency. PST – Easy Cable Management and Synchronized PWM Control Thanks to the additional PWM connector, multiple fans can be daisy-chained and controlled simultaneously through a single header. Optimized FDB Bearing-Shaft Design A hydrodynamic bearing combined with an extended shaft ensures quieter operation by improving pressure distribution and minimizing vibrations. Specifications: General Warranty 6 Years Operating Ambient Temperature 0–40 °C Dimensions 120 (L) x 120 (W) 27 (H) mm Net Weight 172 g Fan Fan Speed 500 -3000 rpm PWM Controlled, 0 rpm below 5% PWM Airflow 73 cfm | 124 m³/h Static Pressure 4.5 mmH2O Fan Bearing Fluid Dynamic Bearing Typical Voltage 12 V DC Start Up Voltage 3.5 V DC Current 0.4 A Cable Length 400 mm + 80 mm Daisy-Chain Cable Connector 4-Pin Fan Plug + 4-Pin Socket RGB LEDs 12x A-RGB Gen2 LEDs Current | Voltage 0.40 A | 5 V DC Connector 3-Pin A-RGB Plug + 3-Pin Socket